Apple’s phones always had a problem that persisted ever since the launch of the iPhone 4S. The problem largely impacted the iPhone 4S and caused the Wi-Fi choice to seem “grayed out” or “dim.” Although not all of its proposed solutions were effective, Apple was quick to respond to this problem. People, in general, devised their own cures in the meantime, with different degrees of effectiveness. Let’s look at How to fix Wi-Fi or Bluetooth Can’t Turn on iPhones.
How to fix it if Wi-Fi or Bluetooth can’t turn on iPhones?
Several users of even newer iPhone models have also seen the same issue throughout the years since it first appeared, even though the iPhone 4S appears to be the device most seriously damaged. If you’re one of them, here’s how to solve it.
The Official Fix from Apple for iPhone 4S
When the issue initially started to affect many iPhone 4S users, Apple offered a potential solution. The suggested fixes, indicating that there is a software problem, include resetting networking settings and, if all else fails, carrying out a full software reset in iTunes. The instructions are listed below. Although the iPhone 4S was the target device for these instructions, they must still apply to later models (and software), and the method for carrying them out should be the same. Follow these steps:
⮚ By selecting Settings > Aeroplane Mode, make sure that aeroplane mode is not active.
⮚ By selecting Settings > General > Reset > Reset Network Settings, you may reset the network settings.
Keep in mind: Resets all network settings, including VPN, APN, Bluetooth pairing history, Wi-Fi passwords, and Wi-Fi security questions.
⮚ Verify that the software on your device is the most recent. Connect your device to your computer and use iTunes to check for updates.
⮚ Perform a software restore in iTunes if your problem is still not fixed.
If it didn’t work, Apple encouraged consumers to “Contact Apple for support and service alternatives” if they were still unable to activate Wi-Fi. That advice should still be valid, and anyone whose devices are still covered by warranties should be able to get them replaced or serviced without paying anything. However, if your gadget is not covered by Apple’s guarantee, you could have to pay to have it mended or purchase a replacement.
Additional Options for the iPhone 4S
Some clients said Apple’s fix had resolved their problems, but others argued it hadn’t. Those who were still having problems believed that the iPhone 4S’s hardware defect had been found by the iOS 7 upgrade. According to a user on Apple’s support forums, the issue was there in the device from the beginning since it was defective, but it wasn’t noticed until the HEAT that was produced during the upgrade process caused the wi-fi chip to malfunction. The website suggests trying to put the phone in a refrigerator for 15 minutes or exposing it to light for 30 minutes if this is your problem. However, you do this at your own risk, and we advise consumers to contact Apple support before acting.
Gray Wi-Fi on Other iPhones
Since this issue initially appeared, customers have stated that it has affected the iPhone 5, iPhone 6, iPhone 7, iPhone 8, and iPhone X models, and two possible reasons have been cited. Similar to the iPhone 4S, software upgrades appear to be one of the causes. Particular iOS versions that have been blamed by some users for the problem include iOS 13, iOS 12, iOS 11.4, and iOS 11.3 releases.
Why is iPhone 12’s Wi-Fi and Bluetooth Grayed Out?
The iPhone’s Wi-Fi is Resetting the Networking settings will restore Wi-Fi. Select General from the Settings menu. On the page’s bottom, there is a Reset button. To proceed, enter the connection passcode in the Reset Network Settings box.
Why Won’t iPhone Turn on the Wi-Fi?
If Wi-Fi remains operational owing to a component of your phone becoming missing, breaking, or warping, you might be able to use it again. If a flex cable or Wi-Fi antenna has come undone, it’s conceivable that a wireless network is not available.
Why Does Bluetooth Not Turn on iPhone?
Make sure your Bluetooth equipment is connected for iOS and iPadOS devices. Your Bluetooth equipment should be turned off and afterwards turned back on. Your device has to be fully charged or linked to a power source, depending on your Bluetooth accessories. Ensure that your accessory has batteries because they might need to be changed otherwise.
What to do If Bluetooth and Wi-Fi Won’t Work?
⮚ By reconnecting, the device may be able to fix momentary OS problems.
The device’s reboot may lower it.
⮚ Simply take out the battery, let it sit for 30 seconds, and then replace it.
⮚ GPS and location access ought to be turned on.
⮚ If you have installed any third-party apps using Wi-Fi or Bluetooth,
remove them.
Conclusion
Apple’s phones have frequently had problems since the iPhone 4S’s introduction. Due to the problem, which mostly impacted the iPhone 4S, the Wi-Fi choice seemed “greyed out” or “dim.” Even though not all of its proposed remedies were successful, Apple responded quickly to this problem. People created their own therapies in the meantime, with varied degrees of effectiveness. When the issue initially started to affect many iPhone 4S customers, Apple offered a potential solution. The suggested fixes, which imply that there is a software problem, include resetting networking settings and, if all else fails, carrying out a full software reset through iTunes.
Frequently Asked Questions
- Why do my iPhone’s Wi-Fi and Bluetooth not work?
Most issues that have kept your iPhone from operating normally can be resolved by restarting the device. After a minute, turn it off and then back on.
- Why is my iPhone’s Bluetooth greyed out?
Turning off the Bluetooth ON button in Settings allows you to reactivate Bluetooth without having to restart the app.
