Swimming pools are like a comfort zone for everybody to chill and relax after a long day at work, or probably a place to catch up with our family members. The metal frame pool can be considered an artificial pool to have a wonderful time and relax. Meanwhile, protecting your pool from the weather is one of the duties you owe to these gorgeous accessories that can easily be of comfort to you. With that said, you would be intimated with the necessary precautions and how you can safeguard your metal frame pool all year round. Read further to know can we Leave a Metal Frame Pool up in Winter or not.
Can we Leave a Metal Frame Pool up in Winter?
It is highly recommended that you have your metal frame pool cover or taken inside during the winter period due to the temperature differences and the ice-cold that might occur. The cold climate can easily affect the durability of your metal frame in the winter. However, some people believe that if they drained out the water through the hose and covered the pool, they would be able to save the metal from the harsh weather conditions of the winter. Be that as it may, if the temperature is lower than the freezing temperature, you should have your metal frame pool taken inside for necessary protection.
The winter climate
The inter climate is always intensely cold and freezing sometimes. Therefore, it is advisable to keep your pool up and covered if the temperature is still above the freezing point. However, it would be best to winterize the pool by keeping it full to the brim throughout the winter seasons. More so, if your location maintains the tropical climates all year long, you might only need to winterize your pool, especially if the pool is in constant use.
The colder climates
It is recommended that you pack your metal frame pool indoors in regions where the temperature drops below 32 degrees Fahrenheit. At this temperature level, there could be damages caused by ice to the poo. Therefore, it is advisable to store the pool indoors when you no longer use it and the temperature has dropped beyond 32 degrees Fahrenheit.
Winterizing your pool
It is highly recommended that you have your pool winterized if you are located in the warmer region of the country; however, you should ensure you do not use the pool at this time. Perhaps you are hoping to use the pool after winterizing it; you should ensure you perform thorough cleaning beforehand. Necessary steps must be taken by removing the skimmer and filter and the necessary plumbing such as the inlet and the outlets.
Ensure you remove the pool’s ladder and the hose used to connect the pump to the pool. The required amount of winterizing chemicals should be added to the pool. However, if you doubt the required amount, you must consult your pool dealer for guidance on the number of chemicals used. Cover up your metal frame pool with the pool cover and then thoroughly clean and drain the pump before you go ahead to store it in a dry location. Ensure your storage location has temperatures between 32 F and 104 F.
Storing your metal frame pool.
If you have finally dismantled your metal frame pool, you must ensure you properly store the metals and the other materials. It is recommended that you revert to the setup manual to refresh your memory on how to dismantle the pool again. More so, it would be best if you allowed the metal component from the pool to dry out completely before taking those components into the store. Try to fit all the parts into the original box used to supply the pool or find other storage compartments where you are very sure it will stay safe and dry. More so, it would be best if you stored in a clean, dry environment free from rodents where the temperature is between 32 F and 104 F to help you protect the pool. Leaving your pool outside without storing it can cause it to damage, grow mold or become completely useless for you.
Here is how to fold and store your Metal frame pool
- Firstly, you have to remove all plumbing materials from your pool, such as pipes, hoses, pumps, and other components. Set those materials aside so they can dry out completely.
- Drain your pool completely and sundry it completely for at least two hours.
- Deflate the pool top ring and lower the body.
- You can sprinkle the talcum powder over the pool.
- From the square fold in the one-sixth of the liner into each side of the pool.
How can you keep your pool from freezing in the winter?
To keep your pool in the freezing winter, you should follow the below steps.
- Ensure that the pool water is balanced.
- You can then lower the water level to below the skimmer
- Remove all the pipes and other equipment that are way below the skimmer.
- Add up the antifreeze to your swimming pool to prevent it from freezing up when the temperature is extremely low.
Your metal frame swimming pool can be damaged if necessary precautions and care aren’t taken in the winter. This is because the temperature is always extremely low during this period causing your swimming pool to freeze up. Moreover, necessary precautions should be taken if you decide to store your metal frame pool indoor during the winter. Aside from this, you must have the required knowledge that would enable your dismantling and appropriately pack your pool to avoid any damages.
How can you winterize a metal frame pool?
To winterize your metal frame pool, you must turn the pump on to easily allow the chemicals you have added to the pool to circulate easily for about a day or more, depending on the size of the pool.
Can I leave my metal pool over the winter?
You can keep up your pool in warmer climates where the temperatures do not drop below 32 degrees Fahrenheit. However, if you are in a colder region, you should maintain all the advice that has been highlighted in this piece.