Hydro jetting is a method used for the removal of accumulated dirt and dust off pipes as well as other surfaces. The method uses a fast-speed water pressure nozzle and can host a hefty amount. The question of its worth arises in many users’ minds. Here we will see Is Hydro Jetting Worth It?
What is hydro jetting?
The process used to clean clogged pipes or accumulated dust and dirt on services using a power hose is called hydro jetting. The procedure is done by a professional plumber and removes any blockages or build-ups in the drainage systems or pipes.
How it works?
The physics behind the hydro jetting process is all on its high-pressure nozzle, which is able to squeeze into the pipes and drainage ways. A high pressure of water is then released, usually about 35,000 PSI, this high pressure enables any dirt or accumulated waste to be pushed out into the water flow and out of the pipes, unclogging them.
Think you need hydro jetting? Here are some things to check out for and analyze if your pipes or drainage are clogged.
How to identify if your pipes are actually clogged? Here are some signs to look out for.
- While flushing the toilet, the flushed water appears back into the toilet or some other outlet such as the bathtub or the sink.
- Bubbling of the toilet when sink water is opened.
- Overflowing of water.
- Slow-running drainage.
How much does hydro jetting cost?
Now that you have identified whether your drainage lines need hydro jetting or just regular cleaning, you might feel like investigating further into the prices of hydro jetting. A hydro jetting process can cost from a couple hundred to a thousand dollars. The prices may range mainly due to the intensity of the blockage and the labor costs it may endure. The costs may also fluctuate due to the area of residence as well as the location of the blockage. For further details and pricings, feel free to ring your local plumbers and let them know the details of it all so that they may present you with a rough estimation and a package.
Is hydro jetting worth a couple of dollars?
Hydro jetting is worth it in the case of heavy clogging or disruption in the pipelines. For minor cleaning issues, it is better to get them cleaned or clean them yourselves, however for the excessive drainage and clogging, hydro jetting is worth a couple hundred dollars. If you do not get rid of the clogging in its initial stages, it may lead to an even more expensive solution at the end. Therefore, it is advisable to get routine drainage checks and solve the issues in the start.
FAQs
Hydro jetting is a small process but costs a somewhat hefty amount and should be thoroughly thought about before getting done. Here are some frequently asked questions which you may also have when thinking about getting hydro jetting. However, for more questions not listed below, feel free to contact your local plumbing service.
- Is it safe for my pipes?
Yes, it is completely safe for the pipes. Hydro jetting will not be damaging you pipes as long as it is dealt by a professional. The reason for this is that professionals can carefully evaluate the type of cleaning required and therefore, adjust the water pressure on the nozzle of the hydra jet. A little too much or a little too less would result in inadequate results and might even cause the damaging of your pipes.
- Will hydra jetting work on roots?
Yes. Hydra jetting will also eliminate any accumulated roots or earth matter clogging your pipes. For more stubborn roots, a higher water pressure may be used and an after cleaning would also be required in some cases.
- Does it work on cement pipes?
Yes. Hydra jetting is good to go for PVC, clay as well as cement pipes.
- How often should I go for hydro jetting?
If you are not sure whether your pipes need it, get it checked. Having hydro jetting once every 1.5 years is a good preventive measure to make sure debris is not clogged. However, if you are facing clogging issues more often, hydra jetting may not be the solution to it. In this case, it is best to get it checked by a professional.
- Can hydro jetting work if my toilet is clogged?
While there may be other reasons for clogged toilets, hydra jetting can be used if the pipes are blocked. This problem may arise with the excessive use of toilet paper or other debris.
Conclusion
Hydra jetting is an essential process and should be done every 1.5 years to avoid bigger mishaps which may be a menace as they would be more time-consuming and expensive. Hydra jetting is most effective when used by an experienced professional.