Roombas help keep spaces tidy, and their self-emptying capability assists in robot maintenance. The bin can fail to clear its bin for several reasons, but most of them can be fixed without the need for maintenance. In this article, we’ll guide you through the causes of the error Roomba Bin Error and how to clear it.
The robot is made to operate only under favorable conditions, unless something is out of place, it will display an error code. Error 14 is concerned with the bin part of the vacuum. This error indicates that it cannot empty itself.
The Roomba uses a set of sensors to determine whether the bin has been installed correctly, and over time, those sensors may start to lose accuracy. Your Roomba will display the Bin error if the sensor believes that the bin was improperly installed or is otherwise not in its proper place.
How To Reset?
Before attempting anything advanced during any type of troubleshooting, it is advisable to address any obvious fixes. Below are easy fixes to debugging error bin codes
Replace The Bin
Try reinstalling the bin since the incorrect installation of a bin frequently results in bin errors. If your model permits it, take out the bin and put it back in. Otherwise, detach the bin, and correctly close the lid. Then clean the sensors. If you still get an error code, This may be that the bin is not compatible with Roomba.
Note that Non-certified substitute bins do not apply to the same high manufacturing standards as iRobot original parts, and they might not be functional with Roomba or its sensors. Ensure to purchase an original Roomba iRobot Gray AerovacBin from the company itself, or check for the iRobot certified label on any alternative sold by a third party.
Clean The Sensors
The sensors are quite delicate and given their location, they frequently come into direct contact with dust and debris and may become obstructed. As a result, the Roomba may not detect the dust bin effectively and may seem like you installed it improperly.
To avoid this, clean the sensors, which are located close to the point where the bin and filter make contact. The sensor should also be cleared of any dirt or debris after removing the trash can.
Reboot The Roomba.
Any software issues that prevented the robot from correctly detecting a bin and determining if you installed it accurately can be fixed by restarting. You can do this by following these steps:
- When the white light surrounding the button begins to rotate clockwise, hold down the Wipe button for 30 seconds before releasing it.
- Wait for it to come back on.
- The restart is completed when the white light goes off. Although some models like 800, work with a beep, once it beeps, the reboot is successful.
- Examine whether the bin problem reappears after restarting your Roomba.
Reset
If a restart does not resolve the error, then try resetting your Roomba. Note that, A reset, will cause your bin to lose all of its personalized preferences, which include all of its trained floor plans and cleanup routines. To reset follow these processes.
- Using the iRobot Home app, navigate to Settings > Factory Reset.
- Accept the request to begin the factory reset.
- Once you approve the request, the Roomba will begin the factory reset process.
- Contact the iRobot support if a factory reset didn’t clear the error or if you encountered other problems. Provided the details of your Roomba like the model number and the type of malfunction you’ve encountered, they can provide you with more specialized assistance.
Conclusion
Roomba sends an error code when it encounters a problem. There are other errors ranging from its brush to battery. The bin error comes when it cannot empty itself. This is a result of the sensors being blocked by specks of dirt. However, when sorting out these errors, ensure that the batteries can still charge. You can always contact customer support for more help if the code doesn’t clear out after following this article.
FAQ’s
- How Much Time Does A Roomba Need To Vacuum A Room?
Cleaning a room that is about 2,000 square feet in size can take a Roomba up to 120 minutes on a full battery. Cleaning also depends on factors including Wi-Fi connectivity, floor type, and the Roomba model.
- How Frequently Should I Empty My Bin?
After each cleanup activity, you must make it a habit to clean the Roomba’s dust bins. Before installing the bin, give them a warm rinse and let it air dry.
- How Long Is The Life Of A Roomba Battery?
The Roomba battery needs to be changed every one to two years. Ensure to change them on time to improve its productivity. Also, ensure to buy the original brand.
