Whirlpool water heaters are engineered to include the most recent innovations in water heating technology while being cost-effective and increasing energy efficiency. Whirlpool has a large selection of electric, natural gas, and liquid propane gas water heaters, as well as electric heat pump systems for both electric and natural gas water heaters. Let us know about the ‘Whirlpool Water Heater Warranty’.
Warranty of Whirlpool Water Heater
The life expectancy of a water heater is regulated by the retailer’s suggested service life. Different types of whirlpool water heaters have 6, 9, or 12-year guarantees with having large gallon capacities. These vary depending on the location and design, installation quality, maintenance schedule, and water management. If the water heater is leaking or not heating up, then it can be repaired.
How long do water heaters last?
A water heater’s life expectancy is eight to twelve years based on the product’s specified service life and it varies based on the unit’s location and design, installation quality, maintenance schedule, and water quality. It is probably the right time to replace the old water heater especially if the tank is leaked or performs abruptly. One can also choose to upgrade to a more energy-efficient model to save money on your utility bills.
Fixes and troubleshooting may be able to save the present water heater in some situations. In case of an electrical problem, such as a blown fuse or tripped breaker, the origin of the unit’s failure has to be checked before looking for a replacement. Regular maintenance will prolong the durability of the water heater, and some repairs, such as upgrading a pressure relief valve or heating coil, are very straightforward.
Common Issues related to Whirlpool Water Heaters
Power Problems
Most of the Whirlpool water heaters come with complex code lights that can help to detect problems. The lights of the water heater being off would suggest that the heater is not in working condition. Therefore, something is wrong with the power with a possibility that the fuse has blown, making the system inoperable.
High Water Temperature
If the water temperature surpasses the thermostat’s highest temperature limit, then it can be said that there are most legitimate issues with the heating process. It’s possible that the insulation is faulty, or that the heating element is overheated due to a defective electrical current.
Sensor Failure
At times, the sensors that measure the temperature of the water can malfunction, which makes it difficult to detect to examine a short circuit in the temperature sensor.
Not Enough Hot Water
Whirlpool heaters are infamous for this issue. The lower element is either broken, or the temperature on the thermostat has been set too low by accident. The water could either be cooled by sediment in the pipelines or a damaged dip tube. Therefore, the cold water entering the tank and hot water remaining in the tank, blend too freely in this circumstance, which decreases the overall temperature.
Water Pressure Problems
When water is heated too rapidly, the tank could be subjected to more water pressure than it can sustain. The relief valve opens in this scenario, enabling water to escape, but this still results in damage to the heater’s valves and usually signals a heating element or water flow issue.
Whirlpool Water Heater Fixing
- Leaks from the tanks have to be checked in case of any leaking from the water heater and for that scenario, the water heater has to be replaced
- The breaker of the Whirlpool water heater has to be checked that its power is on to make sure the water heater is in a good working condition and that the floor near the water heater is completely dry.
- The cover plates in the lower and upper access panel of the water heater have to be unscrewed with a head screwdriver like that of the Philips one and the insulation cutouts should have to be removed by putting on work gloves.
- The limiter switch of the heater has to be checked carefully, since, issues there, can cause the heat limit to switch to trip and cut the power to the unit. Moreover, by pressing the reset button, one can restore the power of the heater.
- Water heaters need to be troubleshot for which the power has to be checked whether running to the upper heating element and if the element is not heating, then the thermostat must have been damaged and it has to be replaced.
Conclusion
Therefore, it can be estimated that the Whirlpool water heater has a maximum 12-year tank warranty, mostly depending on the model. The Whirlpool Water heater warranty covers the return of any defective heater unit or its components but not any accidental damage, delivery costs of sending a new water heater, or any material required for complete installation of the new one.
