Introduction
The Orbit B-hyve is a popular American water sprinkling system that combines wireless fidelity (Wi-Fi) technology with the basic service of water sprinkling to give you remote access and control to your garden’s water sprinkling system. If you are looking for how to connect B-hyve to a wi-fi network, this article is here for you to gain the information about it.
Orbit B-hyve Wi-Fi sprinkler
The Orbit B-hyve Wi-Fi sprinkler is designed to be accessed and controlled remotely to optimize water use productively in. a garden’s water distribution system. It helps save water by judiciously using it whenever and wherever necessary only.
This simple yet effective gadget is available on popular e-commerce platforms like Amazon, Best Buy, Home Depot, and so on. It is available for an economical price of $138 and can be operated via Amazon Alexa as well. This product not only cuts down on the hassle of watering your garden yourself in the prickly heat of summers, it also saves on the amount of precious water being used to water gardens. In this time of shrinking water supplies, it is a good thing that gadgets like B-hyve are there to protect this resource.
B-hyve water sprinkler
Now, you must be here because of one particular reason, you are not able to connect your B-hyve water sprinkler controller to a Wi-Fi network. We will be doing our best to address this concern of yours to your satisfaction.
In particular, you will find the answers to the following question regarding the Orbit B-hyve Wi-Fi Water Sprinkler:
- How can you connect the B-hyve water sprinkler to a Wi-Fi network?
- How can you reset your B-hyve Wi-Fi?
- Why are you not able to connect your B-hyve to Wi-Fi?
Let’s get on to good stuff.
How do you connect your B-hyve to a Wi-Fi network?
To connect your B-hyve timer to a Wi-Fi network, you must have the B-hyve application installed on your mobile. The exact methods of connecting the B-hyve device to a Wi-Fi network are as follows:
- Download and install the free B-hyve mobile application. Follow the command prompts and launch the application.
- On the main screen interface of the application, tap on ‘My B-hyve’. You will see the list of all compatible timers on the screen.
- Tap the timer you wish to make changes to. A setup between the app and the timer will occur that will pair your mobile with the timer device.
- After that, you will see a list of the nearest Wi-Fi networks you can use to connect the B-hyve device to. Tao on your Wi-Fi network and enter the password.
- Tap on ‘Connect to Network’. And it is done, your B-hyve is now connected to the Wi-Fi network.
You can now use your B-hyve Wi-Fi timer to time your garden’s water sprinkling system and effectively water your favorite lilies and pumpkin creepers.
How can you reset your B-hyve Wi-Fi network?
You can reset your B-hyve device’s Wi-Fi network connection just as easily as you connected it in the first place. To reset your Wi-Fi network, follow the instructions gave below:
- Unplug your B-hyve device for at least 10 seconds.
- Open the back panel of the device and find the reset button. Press it and the timer will regime itself as soon as you hit that reset button.
- The timer will once again enter the paired mode as before and resume its normal operation.
- Close the back panel and you are done.
Why are you not able to connect your B-hyve to a Wi-Fi network?
If you are having trouble connecting your B-hyve timer to a Wi-Fi network, most often this issue is resolved by a simple power cycle.
It means that if you unplug your device for 15 to 20 seconds and power it back on again, it should begin normal operation again.
If you still cannot connect to the Wi-Fi network, try power cycling the router by turning it off and then on again after a few seconds. This should solve the connection issue.
Summary
Here, we discussed the garden-essential gadget, the B-hyve water sprinkler timer that works with a Wi-Fi network or a Bluetooth network connection. A B-hyve timer can be connected to a Wi-Fi network via the B-hyve mobile application by following the steps mentioned above. We also discuss some potential reasons why your device may not be able to connect to a network and what you can do to fix it.
Frequently Asked Questions
1.How do I find the reset button on my B-hyve device?
If you are using the B-hyve Indoor/Outdoor timer, you just have to press and hold the B-hyve button five times to get it into paired mode. Alternatively, you can hold the B-hyve Reset Button on the timer’s backside for 10-12 seconds to get it into synchronized mode. The reset button is placed inside the device’s back panel. You will see it as soon as you open the back panel.
2.Does the B-hyve water sprinkling system work without Bluetooth access?
No, the B-hyve water sprinkler system needs a stable Bluetooth connection to function. Generally, the sprinklers need to be within a 50 feet range to receive a signal and start or stop watering the plants.
