Introduction
DirecTV is one of America’s most widely adopted and one of the biggest telecommunications services providers in the North America Region.If you are searching for how to program DirecTV remote then you are at the right place, this article will give you the information about it.
DirecTV remote
DirecTV is a multichannel video programming distributor based out of California. DirecTV’s high-quality video quality is equivalent to its main rival Dish TVs due to its 4K Satellite dishes that are installed for all subscribers to this video streaming service. With hundreds of new subscribers being added every day, the total number of subscribers is in the vicinity of 25 million. With the biggest collection of Sports channels and more, it is no wonder why people prefer this service provider over its rival, Dish.
With affordable plans starting from as low as $74.99/Mo for 160-plus channels in the highest streaming quality, DirecTV has a lot to offer as a telecommunications and television network company. A DirecTV set-top box controls all the streaming content that is received via the 4K dishes set up for each subscriber and the set-top box is controlled by the DirecTV remote only.
However, before using a DirecTV remote control to switch and flip channels to your favorite ones, it must be programmed to the set-top box. That is precisely the thing we are going to talk about, programming a DirecTV remote controller.
In particular, you will find the answers to the following questions regarding the DirecTV video streaming service provider:
- How can you program your DirecTV remote?
- What are some of the most popular DirecTV subscription plans?
Let’s begin.
How to program DirecTV remote?
With a DirecTV connection, you receive a DirecTV Universal remote that can be used to control up to a maximum of 4 devices at a time. You can control DVD players, Speakers, or your DirecTV set-top box.
However, before you could make use of the buttons of a Universal remote to flip through channels, you need to pair it with the device you are going to control by programming the remote controller. This method of programming the remote control can be a bit of a hassle if you do not know what you’re doing. We are going to simplify it for you in the steps given below. To program your DirecTV Universal Remote to your set-top box, follow the given instructions and you will do it in a few minutes
For programming a remote for HD DVR
1.Press MENU on your DirecTV remote.
2.Now, Select Settings > Remote Control > Program Remote.
3.Choose the device for which you want to program the remote.
4.Now, just comply with the on-screen prompts to complete programming the remote.
For a Genie universal remote
- Point your Genie remote towards your Genie HD DVR, Genie Mini, or Wireless Genie Mini.
- Now, simultaneously Press and hold the MUTE and ENTER buttons on the remote. Keep holding these two buttons until a green light on top of the remote flashes twice. Now, let go of the buttons and move on to the next step.
- The TV screen should now be displaying the following message ‘Applying IR/RF setup’. This means that you are in the RF mode and ready to program the remote.
- Now, turn on the device you want to control with your Genie remote controller.
- Press the MENU button on your remote.
- Select Settings > Remote Control > Program Remote.
- Now, find and Select the device you wish to control with the remote.
- All that is left to do is to follow the on-screen prompts to finish the programming process.
This entire process should not take more than a few minutes. If you still have problems programming your remote to your TV, try power cycling your TV, and try again with the given instructions.
Summary
Here, we discussed the DirecTV television service provider. We discussed how you can connect a DirecTV remote controller to your TV by programming it to the remote. A universal remote can be programmed to your DirecTV set-top box within a few minutes following the above-given instructions. We listed the different methods used to program a universal remote received with a DirecTV connection and a Genie Remote. Since both remotes are different, they have slightly different methods of programming to devices.
Frequently Asked Questions
1.My TV is not on the list to program for my Universal or Genie Remote controller. What should I do?
If your device is not on the list, you can enter a 5-digit unique code for your TV model to program the remote.
2.How many devices can be programmed to the DirecTV universal remote controller?
A DirecTV universal remote control can control up to 4 devices at one go. It can be programmed into 4 separate devices like Music Systems, Gaming Consoles, DVD players, and TVs.
3.How much does a DirecTV subscription cost?
DirecTV subscription plans have various prices according to the various needs of the viewer. For a basic high-definition and good sound quality package of 160+ channels, you can get a connection at the price of $74.99 per Month or even lower.
