Hydro jet cleaning is the most widely applied method of removal of surface buildup and coating, as well as pipe blockage using high-velocity water pressure through jet sprays/nozzles, and is extremely handy in cases of rigid sewage blockage. It is majorly used to clear out high-usage commercial (and domestic) drain systems and get them to work as well as new again! The type of nozzle or the amount of water pressure to be used all depends on what kind of blockage is to be cleared. One should also keep in mind that it doesn’t work on broken pipes (kind of obvious, huh?) but is still safe to use on old pipes. This article focuses on the basics of hydro jet cleaning. Let’s know ‘Is Hydro Jet Cleaning Safe With Old Pipes?’
Head over to the following link to see what it essentially looks like:
Functioning of Hydro Jet Cleaning
A hydro jetting machine usually comes with a motor, a water tank, and a hose with changeable nozzles attached, which forces, as mentioned, high-pressure water through your pipes that breaks down build-up and blockages, thus cleaning the pipeline.
In easy terms, the hose is lowered into the drain, the motor is turned on, and then the nozzle pushes out water in all directions, thus clearing the drain of the solid dump that was posing as a hindrance to its smooth functioning.
As easy as this sounds, it is not. It should always be carried out by a licensed professional- please do not try this by yourself at home!
Benefits
• It is environmentally friendly.
- Enhances the drainage functioning in a place, thereby promoting systematic cleanliness.
- It reaches places in the pipe that no other method of cleaning can!
- It deep cleans- quickly and efficiently.
Hydro Jet Cleaning With Cast-Iron Pipes
As you know, with time and use, scales develop in cast-iron pipelines, thus catching fragments of the waste that goes down your plumbing system as a consequence to which the water flow is blocked. Hydro jet cleaning can remove even these hard scales, transforming an almost non-functional drain into a functional one.
How Much Does it Cost?
It can dig a $300+ hole in your pocket easily, and if the job is too heavy, then you might want to skip that Starbucks coffee for a while- prices could go as high as $1000 or higher in that situation!
WHEN TO HIRE A PLUMBER TO CARRY OUT HYDRO JET CLEANING IN YOUR DRAINS:
•Slow drainage in your sinks. (water begins to collect if the tap is running)
•Gurgling sounds.
•Pungent smell of collected waste
Here’s a tip- Immediately call a plumber to look into the issue!
Is it Safe for Old Pipes?
Coming to the main question, yes, hydro jet cleaning is safe for old pipes, although not too old or damaged. Professional plumbers will know- they use pipeline cameras to inspect before they insert the hose, or just have enough experience to tell!
So instead of trying to solve that “small” issue of the blockade, just call a professional! You don’t want an extra burn on your pocket by accidentally damaging your domestic pipeline system while trying to poke around with a drain snake.
NOTE: Insurance generally doesn’t cover sewage blocks.
Conclusion
To sum up everything that has been stated, hydro jet cleaning is the easiest way out to have your pipelines and drainage system cleaned and working well as new. It’s a nature-friendly, non-messy way of ensuring good sewage health. Hydro jetting your drains regularly will help keep them free of solid waste collection and will save you a lot of stress and time from having to snake it time and again. If you’re struggling with drainage problems, you know what to do now!
FAQ
1. Is hydro jet cleaning better than snaking the drain?
Yes, a hundred times yes! Drain Snakes are cheap tools that anyone can use to (temporarily) unclog their drains, when in fact it just makes it all worse, as it either pushes the debris further or damages the pipe walls themselves.
Click the following link to see how snaking works!
2. What does hydro jet cleaning use to clean the drains?
One of the advantages of using a hydro jet cleaner is that it ONLY uses water- absolutely no chemicals or toxic cleaners to free your drain from accumulated garbage.
3. Is hydro jet cleaning any good for PVC pipes?
PVC (Polyvinyl chloride) pipes are better than iron pipes and are smooth surfaces, so they don’t usually let debris stick to them, but if need be, you can just unclog it using a drain plunger!
4. What companies offer hydro jetting services in the US?
Utahsplumber.com, Canyon hill services, are two popular hydro jet cleaning companies in your vicinity. Simply log in to their website to avail their services.
